Airline Crate Requirements for Pets Flying From Canada
A crate that is the right size can still be turned away. Size is the calculation; acceptance is a separate list of construction rules, and it is the list that catches a crate bought online three days before the flight: ventilation on all four sides, a door forming the whole of one end, metal fasteners through the rim, and no wire on the roof. Out of Canada there are three documents that matter: the IATA standard every carrier works from, and the two Canadian carriers who each add to it in their own published wording.

The Standard Underneath Every Airline Rule
IATA’s Container Requirement 1 is what airline kennel policies are written against. Its construction rules, in its own words:
- Ventilation “must be provided on all 4 sides of the container”, and “the total ventilated area must be at least 16% of the total surface of the four sides”.
- “The door must form the whole of one end of the container. It can be either sliding or hinged.”
- “The whole of one end of the container (which can be the door) must be made of welded wire mesh.”
- Where the door locks with pins, “the pins must engage the container by at least 1.6 cm”.
- “If a container has wheels, they must be removed or rendered inoperable.”
- “Absorbent bedding that is suitable for the species must be provided.”
- Water containers “must be open on the top surface allowing the animal unrestricted access and must be securely affixed to the inside of the shipping container so they can’t be dislodged”.
The 16% figure is the one worth checking with a tape rather than an eye. It is a proportion of the four sides added together, not of one side, and a crate with generous slots on the door and small ones elsewhere can miss it while looking well ventilated.
The Fastener Rule That Retail Crates Fail Out of the Box
One sentence in the standard catches crates as they are sold:
Plastic clips must not be the only fasteners holding the top and bottom part together, the use of metal nuts and bolts in every hole is recommended.
A plastic kennel can arrive held together by clips alone. They are fine for a car and a vet visit and they are not fine for a hold, because a crate that separates at the seam is the worst failure available. The fix is a bag of metal nuts and bolts and twenty minutes: one through every hole around the rim, nut on the outside, snug rather than crushed.
Do it when the crate arrives, not the night before. A crate whose holes do not line up is a crate to return, and you want to find that out with time on the calendar.
Wire on the Door, Not on the Roof
This is the point where owners buy the wrong thing, because two different rules both mention wire and they point in opposite directions.
The standard requires welded wire mesh at one end of the container, and that end is normally the door. Both Canadian carriers then rule out wire on top. Air Canada: “Hard-sided. The container top must not be covered with mesh. However, ventilation holes are allowed in the lid.” WestJet Cargo puts it in one line: “Kennels with wire roofs are not allowed.”
So the collapsible wire crate that folds flat and the kennel with a mesh top panel are both out, and the moulded plastic kennel with a metal grille door is in.
Air Canada also rules out collapsible carriers outright, and separately requires that “no part of your pet may extend outside the carrier”.
What Air Canada Adds to the Standard
For an animal in the baggage compartment, Air Canada publishes its own list on top of the IATA rules.
- “Secure and leak proof. The door of the pet carrier must close securely and your pet must not be able to easily push the door open.”
- “Locking pins must engage the container beyond the extrusions by at least 1.6 cm”, which is the IATA figure restated with the extrusions named.
- Wheels “removed prior to check-in”. The standard allows removal or rendering them inoperable; Air Canada asks for removal, so take them off at home.
- Kennels secured “with resealable zip ties for transportation”. Buy them with the crate.
- “Cover the bottom of the carrier with absorbent material such as a blanket.”
- Maximum 292 cm (115 in) in linear dimensions, and 45 kg (100 lb) for pet and kennel combined.
The zip ties and the wheels are the two that get missed, and both are checked at the counter.
What WestJet Cargo Adds
WestJet Cargo’s kennel list is written for the cargo route and reads like a condition inspection, because that is what it is.
- “Kennel must be clean with no offensive odours.”
- “Secure with no cracks or damages that risk the structural integrity.”
- “Floor must be leak-proof and covered with a layer of absorbent non-consumable material.”
- “Ventilation must be on all four sides total surface.”
- “Kennels with wire roofs are not allowed.”
- “One of end of the kennel should be a metal grated door and nothing obstructing the ventilation.”
Two of those are about the crate’s history rather than its design. A second-hand kennel with a hairline crack in the shell, or one that still smells of the last animal, can be refused on condition even though it satisfies every dimension. So yes, a second-hand crate can fly, if it passes on condition as well as on dimensions. If you are borrowing one, inspect the seams and wash it properly.
“Non-consumable” is deliberate. Shredded paper and a puppy pad qualify; straw, wood shavings and anything the animal will eat under stress do not.
WestJet Cargo also puts the fitness of the animal on the shipper: it requires that “the animal is fit to be transported by air”, and it does not accept female dogs and cats in heat or pregnant, or weaned puppies and kittens under eight weeks.
What Gets Checked at the Counter
At the counter or the cargo facility, expect the crate to be checked for:
- The animal is looked at in the crate: can it stand, sit up, turn and lie down.
- The crate is measured and weighed, using external dimensions.
- The seam is checked, which is where the bolts matter.
- The door is pushed, which is where the pin engagement matters.
- Wheels, mesh roof, cracks and cleanliness are looked over.
- Bedding, water container and labelling are checked, then the crate is closed and tied.
None of that takes long when the crate was prepared weeks earlier. All of it takes a very long time when the first bolt goes in at the airport.
Frequently asked questions
Request a QuoteDoes IATA approve travel crates?
IATA says it does not certify, approve, sell or otherwise endorse any commercial dog or cat travel or shipping container as compliant with the Live Animals Regulations, and that it provides the standards for those containers in Container Requirement 1. “IATA-approved” on a product listing is the seller’s claim rather than a certification, so check the crate against the rules above yourself: four-sided ventilation totalling at least 16% of those four sides, a door forming the whole of one end, metal fasteners through the rim, and pins engaging by at least 1.6 cm.
Sources
- IATA Live Animals Regulations, Container Requirement 1, read September 2026
- Air Canada, travelling with pets, read September 2026
- WestJet Cargo, pet air transport, read September 2026
Last updated
Ready to move your pet?
Share where your pet is going, across Canada or abroad. The flights, the travel documents and the door-to-door legs are looked after as one move.
